Download Print this page

Hamilton Beach OG02 Assembly And Operation Manual page 14

Hamilton beach type og02 gas grill assembly and operation manual

Hide thumbs Also See for OG02:

Table of Contents

STEP 7: Grill Head to Cart

NOTE: This step requires two people to lift and position grill head onto cart.

1. Remove the tie wraps securing regulator hose to underside of grill head. Pull hose and igniter

wire out to side of grill head.

2. Carefully lower the grill head onto the cart. Open lid and attach head to cart with four (4)

M6 x 13 screws and four (4) M6 compression washers as shown in Fig.7a.

ASSEMBLY

ASSEMBLY STEPS

Fig.7

Table of Contents