Hamilton Beach OG02 Assembly And Operation Manual page 25

Hamilton beach type og02 gas grill assembly and operation manual

Hide thumbs Also See for OG02:

Table of Contents

POST-ASSEMBLY

GAS CONNECTION

• Never insert any foreign objects into the valve outlet. It may damage the valve and cause a leak.

Leaking gas may result in fire, explosion, heavy body injury, or even death.

• Do not connect this grill to the self-contained LP gas system of a motor home or camper trailer.

• Do not use this grill until leak-tested.

• STOP and call the fire department if any leaks are detected.

• If you cannot stop a gas leak, close the LP tank valve IMMEDIATELY and call the LP gas

supplier or the fire department.

NGER

Failure to follow these instructions exactly could start a fire causing death or

serious injury.

• NEVER store a spare LP tank under or near grill or in an enclosed area.

• NEVER fill the tank beyond 80% full. An overfilled spare LP tank is dangerous because

surplus gas may leak from safety relief valve. The safety relief valve on an LP tank could

activate to release gas and cause a fire.

• Place dust cap on tank valve outlet whenever the tank is not in use. Only install the type of dust

cap on the tank valve outlet that is provided with the tank valve. Other types of caps or plugs may

result in leakage of propane.

• If any gas leaks are found on the LP tank, IMMEDIATELY step away from the grill and call the

fire department.

VERY IMPORTANT:

TO DISCONNECT LP GAS TANK:

1. Turn all the control knobs OFF.

2. Turn the tank valve off fully (turn clockwise to the stop).

3. Detach the regulator assembly from tank valve by turning the quick-coupling nut

counterclockwise.

4. Install the protective cap back onto the LP tank valve.

Table of Contents