Hamilton Beach OG02 Assembly And Operation Manual page 18

Hamilton beach type og02 gas grill assembly and operation manual

Hide thumbs Also See for OG02:

Table of Contents

ASSEMBL

STEP 11: Side Burner

1. Unscrew and remove two front screws holding side burner in place as shown in Fig.11a.

2. Loosen side burner in side shelf and take it out from the top of side burner hole as shown in Fig.11b.

3. Pull the side burner valve with knob through the hole in right side panel as shown in Fig.11c,

and remove the packing material as shown in Fig.11d.

4. Remove knob from side burner valve. To remove pull knob straight out from valve stem

as shown in Fig.11d.

5. Unscrew the two screws at side of valve stem as shown in Fig.11e and Fig.11f.Take care

not to remove the other two screws, or the valve will come apart.

6. Insert valve stem through hole in fascia and attach with previously removed 2 screws

in previous step as shown in Fig.11g.

7. Replace side burner through the side burner hole as shown in Fig.11h, and place the side burner

tube over the valve, making sure that valve is inside side burner tube as shown in Fig.11i.

Fig.11a

Fig.11d

Fig.11g

ASSEMBLY STEPS

Fig.11b

Fig.11e

Fig.11h

Fig.11c

Fig.11f

Fig.11i

Table of Contents