Thermador PRL48 Use And Care Manual page 17
Hide thumbs
Also See for PRL48:
- Care and use manual (136 pages) ,
- Use and care manual (134 pages) ,
- Installation manual (96 pages)
Table of Contents
Advertisement
Available languages
Available languages
si
The Cooktop
Sealed STAR ® Burners
Figure 8: STAR Brass Burner Base
The cooktop features four or six gas surface STAR
burners; the right=front STAR burner is rated at 22,000
BTU/HR (18,000 BTU/HR using Propane) and all other
STAR burners are rated at 18,000 BTU/HR (15,000 BTU/
HR using Propane).
Each burner has a unique QuickClean
TM
base feature
which allows the burner and area around the burner to be
easier to clean.
On all models, the two left and two right burners have the
exclusive ExtraLow ® feature, any remaining burners are
Standard. Each STAR burner has its own control knob.
Control Knobs
Typically, a pair of control knobs is located on the control
panel, directly in front of the pair of gas STAR burners they
control -- with one gas STAR burner positioned in front of
the other on the rangetop.
Bezel
......
i .......
Knob
Figure 10: Standard STAR Burner Control Knob
The symbol near each burner control knob identifies the
burner position on the range cooktop. The symbols shown
in Figure 11 are indicative of 48" range models.
Left Rear
Center Rear
m[]
Om
O0
O0
Left Front
Center Front
O0
[]0
mO
Om
Griddle
Right Rear
D
0
Right Front
B °
m
ii
ii
ii
Griddle
EXtraL0w
ExtraLow
Figure 9: Burner Power Features
Figure 11: Cooktop Symbols
Operation of the STAR Burners
•
Press in on the knob and turn it counter-clockwise
to
the HI setting.
•
The igniter for the selected burner sparks to ignite the
burner.
•
After flame ignition, the igniter stops sparking.
•
Rotate the knob to any flame setting between HI and
SIM.
A blue light is positioned directly above each burner
control knob. The light turns on when the control knob
is rotated to an active mode. It is off when the control
knob is in the OFF position.
English 12
Advertisement
Chapters
Table of Contents
