Hitachi WJ200-001S Instruction Manual page 482
Wj200 series single/three-phase inputs 200v/400v class
Hide thumbs
Also See for WJ200-001S:
- Quick reference manual (104 pages) ,
- Instruction manual (421 pages) ,
- Quick reference manual (95 pages)
Table of Contents
Advertisement
Func.
Name
Code
AVR function select
AVR function select,
2
motor
nd
AVR voltage select
AVR voltage select,
2
motor
nd
AVR filter time constant
AVR deceleration gain
Energy-saving operation
mode
Energy-saving mode tuning
Acceleration time (2)
Acceleration time (2),
2
nd
motor
Deceleration time (2)
Deceleration time (2),
2
motor
nd
Select method to switch to
Acc2/Dec2 profile
Select method to switch to
Acc2/Dec2 profile, 2
Acc1 to Acc2 frequency
transition point
Acc1 to Acc2 frequency
transition point, 2
nd
Dec1 to Dec2 frequency
transition point
Dec1 to Dec2 frequency
transition point, 2
nd
Acceleration curve selection
Deceleration curve selection
"A" Function
Description
Automatic (output) voltage regulation,
selects from three type of AVR functions,
three option codes:
AVR enabled
AVR disabled
AVR enabled except during
deceleration
200V class inverter settings:
200/215/220/230/240
400V class inverter settings:
380/400/415/440/460/480
Define the time constant of the AVR
filter, range is 0 to 10 seconds.
Gain adjustment of the braking
performance, range is 50 to 200%
Two option codes:
Normal operation
Energy-saving operation
Range is 0.0 to 100 %.
Duration of 2
nd
range is:
0.01 to 3600 seconds.
Duration of 2
nd
range is:
0.01 to 3600 seconds.
Three options for switching from 1st to
2nd accel/decel:
2CH input from terminal
Transition frequency
nd
motor
Forward and reverse
Output frequency at which Accel1
switches to Accel2, range is 0.0 to
400.0 Hz
motor
Output frequency at which Decel1
switches to Decel2, range is 0.0 to
400.0 Hz
motor
Set the characteristic curve of Acc1 and
Acc2, five options:
linear
S-curve
U-curve
Inverse U-curve
EL S-curve
Set the characteristic curve of Dec1 and
Dec2, options are same as above ()
segment of acceleration,
segment of deceleration,
Ver.253
Run
Mode
Defaults
Edit
A
B
Initial data
02
02
230/
400
230/
400
0.300
100.
00
50.0
10.00
10.00
10.00
10.00
00
00
0.00
0.00
0.00
0.00
01
01
Units
V
V
s
%
%
s
s
s
s
Hz
Hz
Hz
Hz
Advertisement
Table of Contents
Troubleshooting
