Fault Codes - Thermador PRL304EG Service Manual
Pro grand series lp gas ranges
Hide thumbs
Also See for PRL304EG:
- Care and use manual (88 pages) ,
- Installation instructions manual (44 pages)
Table of Contents
Advertisement
Service Manual for Thermador Pro Grand LP Gas Ranges, Models: PRL304EG, PRL364EDG, PRL364ELG, PRL366EG, PRL484ECG, PRL486EDG, PRL486EDPG, PRL484ELG
3.8 Fault Codes
When a fault is detected, this appliance will display a fault code
(see Figure 24, on page 20). The fault codes are represented by the
manner in which two blue LED indicators are blinking.
Depending on the range model, the blue LEDs that blink are located
either horizontally or vertically on the control panel. The horizontal
positioned blue LEDs (see Figure 21 and Figure 22) will first blink on
the left and then the right, and the vertical positioned blue LEDs (see
Figure 23) will first blink on the top and then the bottom.
For example, if the first LED blinks 4 times followed immediately by
the second LED blinking 3 times, that represents a fault code of 43 on
the chart (see Figure 24, on page 20).
Figure 21: Two Horizontal LED Indicators
58300000156573_ARA_EN_B
Figure 22: Three Horizontal LED Indicators (Only Blue LEDs Blink)
Figure 23: Two Vertical LED Indicators
Page 19 of 119
- Quick Links:
- Applicable Models
- Wiring Diagram
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
